Scooters Up to 100CC Engines

Home » Moletech » Scooters Up to 100CC Engines

Moletech Fuel Saver is a technological breakthrough in a simple-to-use device that is easy to install. The results are validated by California Environmental Engineering (CEE) - Center for Environmental Research. It is both United States EPA recognized and CARB certified. Click here to read an official letter showing our product works.

The Moletech Fuel Saver has the ability to change three areas within the spectrum of gasoline by absorbing the CH (Benzene) of saturated and unsaturated hydrocarbon. According to the university research papers, the ceramics absorb the thermal energy from their surrounding environment then release it in a specific wavelength, breaking the intermolecular van der Waals force (the force that binds molecules) between the gasoline molecules. This results in the change of aggregation of gasoline molecules from 'cluster' to 'single molecule'. This changes several properties of the gasoline, such as surface tension and flash point. The surface tension is decreased, resulting in better atomization (smaller droplets) of the fuel, which provides a greater surface area to make contact with air, leading to far greater fuel efficiency. This in turn increases horsepower, reduces fuel consumption, reduces carbon build-up and reduces toxic and greenhouse exhaust emissions.

Moletech™ is a fuel enrichment system that modifies the properties of fuel. It changes the molecular aggregation of the fuel from larger clusters to smaller clusters or even single molecules by breaking down the van der Waals force between the fuel molecules. The smaller fuel molecules expose a larger surface area for improved contact with oxygen which produces a better combustion reaction, in turn allowing greater fuel efficiency. Experimental data and several research papers show that the treated fuel is able to provide an improvement of the fuel efficiency as a result of this process.

Moletech Fuel Saver is a technological breakthrough in a simple-to-use device that is easy to install.

In summary, we restructure the environment for the fuel, water and air within the vehicle's operating system, to thereby deliver more kilometres per litre, reduce dangerous exhaust pollutants and most importantly, lower harmful greenhouse gases.

Click here to read an official letter showing our product works.

Car Installation


Motorcycle Installation


Diesel Installation

 

1. What is Moletech?
In a technological breakthrough Moletech is three clip in modules that maximise an engine’s fuel efficiency, increase horsepower and torque and decrease greenhouse gas emissions. The product lasts an engine’s lifetime and is easily installed in under an hour. Specific models have been created for petrol, diesel and LPG engines. The system operates by using Molecular Reaction Technologies to reduce the size of the smallest droplets of fuel within the vehicle’s fuel tank and fuel lines. Mtech changes the aggregation of fuel molecules from ‘cluster’ to ‘single molecule’. The result is decreased surface tension leading to better atomisation of the fuel and far greater fuel efficiency.

2. How much does the Moletech Fuel Saver cost?
The cost of the product varies according to the vehicle's engine capacity and fuel tank capacity.

3. How does Moletech Fuel Saver produce more negative oxygen?
We use Nano Negative Ion technology which is researched and developed by ITRI (Industrial Technology Research Institute, Taiwan Government). The Negative Ion releases a negative electric charge in the oxygen molecule and activates it. Institute tests have shown that our Fuel Saver can increase the inhalant amount of oxygen by 20%.

4. What material is used to produce the Moletech Fuel Saver?
Aluminum alloys, stainless steel, ceramic and magnet have been investigated. The new technology is applied best by using the ceramic.

5. What is the difference between the Moletech Fuel Saver and other fuel savers which use Magnet or Infrared?
Moletech Fuel Saver uses a revolutionary world leading technique called Molecular Reaction Technology. It is totally different to all other fuel saving devices around the world. We use a magnet within the petrol sensor as a temperature stabilizer only. This ensures the molecular reaction continues in freezing conditions.

6. Will the Moletech Fuel Saver perform if it is installed into a fuel tank that is badly contaminated with sludge or muddy water?
Many contaminants can reduce the performance of the Fuel Saver. We recommend that the tank be cleaned prior to installation to achieve best results.

7. Can the Moletech Fuel Saver dissolve or remove contamination from the fuel tank or clean the fuel filter?
Moletech cannot dissolve or remove contamination or clean a dirty fuel filter. In some cases, contamination can damage the Fuel Saver sensors. In other cases, it can cause the sludge to break down, move through the system and become trapped in the fuel filter. Best results are seen by cleaning contaminated tanks prior to installation.

8. What are the other benefits of installing the Moletech Fuel Saver?
It will remove carbon build up in the engine, increase the life of the engine oil, fuel injectors, and spark plugs. By reducing the amount of unburned emissions, the life of the catalyst (catalytic converter) will be extended.

9. What will happen if we don’t install the Moletech Air Sensor into the air intake?
You will not receive the full benefits of increasing the inhalant amount of oxygen by 20%, which will result in a 2% to 3% loss in fuel savings.

10. Does the Moletech Fuel Saver rearrange the molecules of kerosene to make it more combustible?
Yes. Moletech works on kerosene just as it does on gasoline, diesel, natural gas, and liquid propane gas (LPG).

11. Do I need to perform the engine rev as stated in the final procedure every time I purchase fuel?
No. You only need to perform this procedure one time after completing the installation.

12. Can I double my savings by installing another Moletech Fuel Saver Kit?
No. Although installing another kit will reduce the time taken for the molecular reaction to take affect, the amount gained is negligible and does not warrant the extra expense of a second kit.

13. Do I need to adjust my fuel system?
No. You should not have to make any adjustment to see the improvement as long as the engine was well tuned prior to installation.

14. When can I expect results?
Most users have felt the extra performance within 30 minutes of installation. Only in a few cases will you need to drive some distances (in some cases up to 5000 km) before the effects of the Fuel saver are realized. Please make sure you check your mileage before you install Moletech.
Mileage is the sum of the total distance driven divided by the amount of fuel used. Many people believe they are receiving better mileage than they actually are. We recommend you take proper readings before installing Moletech.

15. Why 5000 Km?
Poorly maintained engines and large amounts of carbon build-up can slow down the reaction of the Fuel Saver. It will however eventually become effective.

16. Do the climatic conditions make a difference?
Yes. In winter seasons engines are run more often without the vehicle moving; icy road conditions, etc. This can affect results. However they will still proportionally improve. Proper mileage tests will confirm positive results.

17. Could my mileage stay the same or even decrease? Why?
Yes.

1. It is possible that your engine could temporarily decrease in mileage and increase in emissions after the initial installation. This would be due to poor maintenance, excessive carbon build-up, and is temporary. The Fuel Saver will eventually stabilize the system.
2. In vehicles that do not have computer control of the idle speed, the idle can increase by as much as 500RPM. If this occurs, please ask your mechanic to reduce the idle speed or you will not save fuel in traffic.
3. Ensure the Moletech Fuel Saver makes contact with the fuel. We have found that shortcuts have been taken during installation by dropping the Fuel Saver sensor down the filler neck. If a filter or anti-siphon device is fitted into the filler neck, the Fuel Saver sensor will not enter the fuel tank, and the fuel will not be treated.
4. Ensure the engine is well serviced and the engine oil is in good condition. Change the engine oil if necessary.
5. Any mechanical problem with the engine, in particular the fuel or lubrication system, will cause the Fuel Saver to be ineffective.

18. Can I use Moletech Gasoline on diesel vehicles or Moletech Diesel on gasoline vehicles?
No. The diesel Fuel Saver is designed for diesel fuel and the gasoline Fuel Saver is designed for gasoline. The molecule reaction is different for each type of fuel. Installing an incorrect Fuel Saver sensor will give poor or negative results.

Kuala Lumpur - Malaysia After installing the Moletech M1010 in my BMW R1200GS sport-tourer I noticed the difference. With an overall increase of over 4 PS in power I am a very satisfied Moletech user. With increased power and a smoother ride I will be recommending Moletech to my friends HOG - Harley Owners Group.

Melbourne - Australia After installation of the Moletech I noticed extra power immediately which was incredible. Two weeks in, I started getting more mileage per tank. This increased from about 300 kilometres per tank to 350 kilometres.

Sydney - Australia I have been using Moletech Fuel Saver in my truck, an 11.0 litre Diesel Mitsubishi Prime Mover. I normally spend around $100,000 per year on fuel. After installing Moletech Fuel Saver, I have noticed a solid 5% saving which gives me $5,000 savings per year. Moletech Fuel Saver is easy to install, maintenance free and it works.

Florida - USA I have been in the transport industry for over 15 years and never have we seen the result we achieved after using this device. We installed the product and all 3 trucks we tested gave decent fuel savings. They ranged from 10% up to 20% and that will save anyone in the transport industry a decent amount over 12 months. Our policy is to turn our trucks over every 3 to 5 years.

Arizona - USA I do excessive mileage in my Villager and spend a decent amount of money on gasoline every week. Since installing the fuel device in my vehicle I am getting 3 miles extra per gallon. That equates to a 16% saving. I will be recommending the Yes Green Car product to my friends.

Tom Torbjornsen - USA Host of the "America's Car Show" confirms after installing the "yes green car" fuel saver into his personal vehicle a saving of 8% has been achieved after 2 months. Tom has discussed the success of the trial on the America's car show which is aired between 10pm and 12 midnight every Sunday.

Jose Ulloa - USA The Latino CyberguyAt first I was reluctant to have the device installed in my Chevy Silverado 2007. I would like to not only thank you but praise the results. The system was installed over 10 weeks ago and I can confidently say there is a great improvement. My Silverado has now increased from 350 miles per tank to 420 miles per tank. I noticed an increase in performance immediately after leaving the installation facility and there is greater torque as I drive up hills. Initially I was convinced the product must do something when I read the AAA of Southern California report that showed a decent improvement in lower emissions.

Click here for more